Cisco Nexus 7000 Series - Show Ldap-Server Statistics

show ldap-server statistics
To display the Lightweight Directory Access Protocol (LDAP) server statistics, use the show ldap-server
statistics command.
show ldap-server statistics {ipv4-address| ipv6-address| host-name}
Syntax Description
Server IPv4 address in the A.B.C.D format.ipv4-address
Server IPv6 address in the X:X:X:X format.ipv6-address
Server name. The name is alphanumeric, case
sensitive, and has a maximum of 256 characters.
host-name
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.5.0(2)
Usage Guidelines
You must use the feature ldap command before you can display LDAP information.
This command does not require a license.
Examples
This example shows how to display the statistics for an LDAP server:
switch# show ldap-server statistics 10.10.1.1
Server is not monitored
Authentication Statistics
failed transactions: 0
sucessfull transactions: 0
requests sent: 0
requests timed out: 0
responses with no matching requests: 0
responses not processed: 0
responses containing errors: 0
Related Commands
DescriptionCommand
Enables LDAP.feature ldap
Cisco Nexus 7000 Series Security Command Reference
834
Show Commands
show ldap-server statistics