show role feature
To display the user role features, use the show role feature command.
show role feature [detail| name feature-name]
Syntax Description
(Optional) Displays detailed information for all
features.
detail
(Optional) Displays detailed information for a specific
feature. The feature name is case sensitive.
name feature-name
Command Default
Displays a list of user role feature names.
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the user role features:
switch(config)# show role feature
feature: aaa
feature: access-list
feature: arp
feature: callhome
feature: cdp
feature: crypto
feature: gold
feature: install
feature: l3vm
feature: license
feature: ping
feature: platform
feature: qosmgr
feature: radius
feature: scheduler
feature: snmp
feature: syslog
<content deleted>
This example shows how to display detailed information for all the user role features:
switch(config)# show role feature detail
Cisco Nexus 7000 Series Security Command Reference
865
Show Commands
show role feature
To Next Page
Loading...
