Cisco Nexus 7000 Series - Aaa Group Server Tacacs

aaa group server tacacs+
To create a TACACS+ server group and enter TACACS+ server group configuration mode , use the aaa
group server tacacs+ command. To delete a TACACS+ server group, use the no form of this command.
aaa group server tacacs+ group-name
no aaa group server tacacs+ group-name
Syntax Description
TACACS+ server group name. The name is
alphanumeric and case-sensitive. The maximum
length is 64 characters.
group-name
Command Default
None
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
You must use the feature tacacs+ command before you configure TACACS+.
This command does not require a license.
Examples
This example shows how to create a TACACS+ server group and enter TACACS+ server configuration mode:
switch# configure terminal
switch(config)# aaa group server tacacs+ TacServer
switch(config-radius)#
This example shows how to delete a TACACS+ server group:
switch# configure terminal
switch(config)# no aaa group server tacacs+ TacServer
Related Commands
DescriptionCommand
Enables TACACS+.feature tacacs+
Displays server group information.show aaa groups
Cisco Nexus 7000 Series Security Command Reference
50
A Commands
aaa group server tacacs+