feature mka
To enable the MACsec Key Agreement (MKA) feature, use the feature mka command. To disable the MKA
feature, use the no form of this command.
feature mka
no feature mka
Syntax Description
This command has no arguments or keywords.
Command Default
Disabled
Command Modes
Global configuration (config)
Command History
ModificationRelease
This command was introduced.8.2(1)
Examples
This example shows how to enable the MKA feature:
switch# configure terminal
switch(config)# feature mka
This example shows how to disable the MKA feature:
switch# configure terminal
switch(config)# no feature mka
Related Commands
DescriptionCommand
Configures the cipher suite for encrypting traffic with
MACsec.
cipher suite
Configures the confidentiality offset for MKA
encryption.
conf-offset
Creates a key or enters the configuration mode of an
existing key.
key
Creates a keychain or enters the configuration mode
of an existing keychain.
key chain keychain-name
Configures the text for a MACsec key.key-octet-string
Cisco Nexus 7000 Series Security Command Reference
325
F Commands
feature mka
To Next Page
Loading...
