show startup-config tacacs+
To display TACACS+ configuration information in the startup configuration, use the show startup-config
tacacs+ command.
show startup-config tacacs+
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the TACACS+ information in the startup configuration:
switch# show startup-config tacacs+
version 4.0(1)
Cisco Nexus 7000 Series Security Command Reference
909
Show Commands
show startup-config tacacs+
To Next Page
Loading...
