Cisco Nexus 7000 Series - Clear Cts Cache

clear cts cache
To clear the Cisco TrustSec authentication and authorization information cache, use the clear cts cache
command.
clear cts cache
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
This command requires the Advanced Services license.
Examples
This example shows how to clear the Cisco TrustSec authentication and authorization cache:
switch# clear cts cache
Related Commands
DescriptionCommand
Enables the Cisco TrustSec feature.feature cts
Cisco Nexus 7000 Series Security Command Reference
62
C Commands
clear cts cache