ssh server enable
To enable the Secure Shell (SSH) server for a virtual device context (VDC), use the ssh server enable
command. To disable the SSH server, use the no form of this command.
ssh server enable
no ssh server enable
Syntax Description
This command has no arguments or keywords.
Command Default
Enabled
Command Modes
Global configuration
Command History
ModificationRelease
This command was deprecated and replaced with the feature ssh
command.
4.1(2)
This command was introduced.4.0(1)
Usage Guidelines
The Cisco NX-OS software supports SSH version 2.
This command does not require a license.
Examples
This example shows how to enable the SSH server:
switch# configure terminal
switch(config)# ssh server enable
This example shows how to disable the SSH server:
switch# configure terminal
switch(config)# no ssh server enable
XML interface to system may become unavailable since ssh is disabled
Related Commands
DescriptionCommand
Displays the SSH server key information.show ssh server
Cisco Nexus 7000 Series Security Command Reference
668
S Commands
ssh server enable
To Next Page
Loading...
