Cisco Nexus 7000 Series - Show System Internal Pktmgr Internal Control Sw-Rate-Limit

show system internal pktmgr internal control sw-rate-limit
To display the inband and outband global rate limit configuration for packets that reach the supervisor module,
use the show system internal pktmgr internal control sw-rate-limit command.
show system internal pktmgr internal control sw-rate-limit
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any
Command History
ModificationRelease
This command was introduced.5.1(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the inband and outband global rate limit configuration for packets that
reach the supervisor module:
switch# show system internal pktmgr internal control sw-rate-limit
inband pps global threshold 12500 outband pps global threshold 15500
switch#
Related Commands
DescriptionCommand
Configures rate limits globally on the device for
packets that reach the supervisor module.
rate-limit cpu direction pps action log
Cisco Nexus 7000 Series Security Command Reference
916
Show Commands
show system internal pktmgr internal control sw-rate-limit