enrollment terminal
To enable manual cut-and-paste certificate enrollment through the switch console, use the enrollment terminal
command. To revert to the default certificate enrollment process, use the no form of this command.
enrollment terminal
no enrollment terminal
Syntax Description
This command has no arguments or keywords.
Command Default
The default is the manual cut-and-paste method, which is the only enrollment method that the Cisco NX-OS
software supports.
Command Modes
Trustpoint configuration
Command History
ModificationRelease
This command was introduced.4.1(2)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to configure trustpoint enrollment through the switch console:
switch# configure terminal
switch(config)# crypto ca trustpoint admin-ca
switch(config-trustpoint)# enrollment terminal
This example shows how to discard a trustpoint enrollment through the switch console:
switch(config)# crypto ca trustpoint admin-ca
switch(config-trustpoint)# no
enrollment terminal
Related Commands
DescriptionCommand
Authenticates the certificate of the certificate
authority.
crypto ca authenticate
Cisco Nexus 7000 Series Security Command Reference
293
E Commands
enrollment terminal
To Next Page
Loading...
