Cisco Nexus 7000 Series - Feature Eou

feature eou
To enable Extensible Authentication Protocol over User Datagram Protocol (EAPoUDP), use the feature eou
command. To disable EAPoUDP, use the no form of this command.
feature eou
no feature eou
Syntax Description
This command has no arguments or keywords.
Command Default
Disabled
Command Modes
Global configuration
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
You must use the feature eou command before you configure EAPoUDP.
When you disable EAPoUDP, the Cisco NX-OS software removes the EAPoUDP configuration.Note
This command does not require a license.
Examples
This example shows how to enable EAPoUDP:
switch# configure terminal
switch(config)# feature eou
This example shows how to disable EAPoUDP:
switch# configure terminal
switch(config)# no feature eou
Related Commands
DescriptionCommand
Enables EAPoUDP.feature eou
Displays EAPoUDP information.show eou
Cisco Nexus 7000 Series Security Command Reference
322
F Commands
feature eou