show ipv6 snooping features
To display information about about snooping features configured on the router, use the show ipv6 snooping
features command.
show ipv6 snooping features
Syntax Description
This command has no arguments or keywords.
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.8.0(1)
Usage Guidelines
The show ipv6 snooping features command displays the first-hop features that are configured on the router.
Examples
The following example shows that both IPv6 NDP inspection and IPv6 RA guard are configured on the router:
Router# show ipv6 snooping features
Feature name priority state
RA guard 100 READY
NDP inspection 20 READY
The table below describes the significant fields shown in the display.
Table 6: show ipv6 snooping features Field Descriptions
DescriptionField
The names of the IPv6 global policy features
configured on the router.
Feature name
The priority of the specified feature.priority
The state of the specified feature.state
Cisco Nexus 7000 Series Security Command Reference
825
Show Commands
show ipv6 snooping features
To Next Page
Loading...
