Cisco Nexus 7000 Series - Show Tacacs-Server

show tacacs-server
To display TACACS+ server information, use the show tacacs-server command.
show tacacs-server [hostname| ip4-address| ipv6-address] [directed-request| groups| sorted| statistics]
Syntax Description
(Optional) TACACS+ server Domain Name Server
(DNS) name. The maximum character size is 256.
hostname
(Optional) TACACS+ server IPv4 address in the
A.B.C.D format.
ipv4-address
(Optional) TACACS+ server IPv6 address in the
X:X:X::X format.
ipv6-address
(Optional) Displays the directed request configuration.directed-request
(Optional) Displays information about the configured
TACACS+ server groups.
groups
(Optional) Displays sorted-by-name information about
the TACACS+ servers.
sorted
(Optional) Displays TACACS+ statistics for the
TACACS+ servers.
statistics
Command Default
Displays the global TACACS+ server configuration
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
TACACS+ preshared keys are not visible in the show tacacs-server command output. Use the show
running-config tacacs+ command to display the TACACS+ preshared keys.
You must use the feature tacacs+ command before you can display TACACS+ information.
This command does not require a license.
Cisco Nexus 7000 Series Security Command Reference
921
Show Commands
show tacacs-server