Cisco Nexus 7000 Series - Page 948

Examples
This example shows how to display information for all TACACS+ servers:
switch# show tacacs-server
Global TACACS+ shared secret:********
timeout value:5
deadtime value:0
total number of servers:2
following TACACS+ servers are configured:
10.10.2.2:
available on port:49
10.10.1.1:
available on port:49
This example shows how to display information for a specified TACACS+ server:
switch# show tacacs-server 10.10.2.2
10.10.2.2:
available for authentication on port:1812
available for accounting on port:1813
idle time:0
test user:test
test password:********
This example shows how to display the TACACS+ directed request configuration:
switch# show tacacs-server directed-request
enabled
This example shows how to display information for TACACS+ server groups:
switch# show tacacs-server groups
total number of groups:1
following TACACS+ server groups are configured:
group TacServer:
server 10.10.2.2 on port 49
deadtime is 0
vrf is vrf3
This example shows how to display information for a specified TACACS+ server group:
switch# show tacacs-server groups TacServer
group TacServer:
server 10.10.2.2 on port 49
deadtime is 0
vrf is vrf3
This example shows how to display sorted information for all TACACS+ servers:
switch# show tacacs-server sorted
Global TACACS+ shared secret:********
timeout value:5
deadtime value:0
total number of servers:2
following TACACS+ servers are configured:
10.10.1.1:
available on port:49
10.10.2.2:
available on port:49
This example shows how to display statistics for a specified TACACS+ servers:
switch# show tacacs-server statistics 10.10.2.2
Server is not monitored
Authentication Statistics
failed transactions: 0
sucessfull transactions: 0
requests sent: 0
requests timed out: 0
responses with no matching requests: 0
Cisco Nexus 7000 Series Security Command Reference
922
Show Commands
show tacacs-server