Cisco Nexus 7000 Series - Show Password Strength-Check

show password strength-check
To display password-strength checking status, use the show password strength-check command.
show password strength-check
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
ModificationRelease
This command was introduced.4.0(3)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display password-strength checking status:
switch# show password strength-check
Password strength check enabled
Related Commands
DescriptionCommand
Enables password-strength checking.password strength-check
Displays security feature configuration in the running
configuration.
show running-config security
Cisco Nexus 7000 Series Security Command Reference
845
Show Commands
show password strength-check