Cisco Nexus 7000 Series - Page 887

Examples
This example shows how to display information for all RADIUS servers:
switch# show radius-server
Global RADIUS shared secret:********
retransmission count:1
timeout value:5
deadtime value:0
total number of servers:2
following RADIUS servers are configured:
10.10.1.1:
available for authentication on port:1812
available for accounting on port:1813
10.10.2.2:
available for authentication on port:1812
available for accounting on port:1813
This example shows how to display information for a specified RADIUS server:
switch# show radius-server 10.10.1.1
10.10.1.1:
available for authentication on port:1812
available for accounting on port:1813
idle time:0
test user:test
test password:********
This example shows how to display the RADIUS directed request configuration:
switch# show radius-server directed-request
enabled
This example shows how to display information for RADIUS server groups:
switch# show radius-server groups
total number of groups:2
following RADIUS server groups are configured:
group radius:
server: all configured radius servers
group RadServer:
deadtime is 0
vrf is management
This example shows how to display information for a specified RADIUS server group:
switch# show radius-server groups RadServer
group RadServer:
deadtime is 0
vrf is management
This example shows how to display sorted information for all RADIUS servers:
switch# show radius-server sorted
Global RADIUS shared secret:********
retransmission count:1
timeout value:5
deadtime value:0
total number of servers:2
following RADIUS servers are configured:
10.10.0.0:
available for authentication on port:1812
available for accounting on port:1813
10.10.1.1:
available for authentication on port:1812
available for accounting on port:1813
This example shows how to display statistics for a specified RADIUS server:
switch# show radius-server statistics 10.10.1.1
Server is not monitored
Cisco Nexus 7000 Series Security Command Reference
861
Show Commands
show radius-server