Related Commands
DescriptionCommand
Applies an IPv4 ACL to an interface as a router ACL.ip access-group
Configures an IPv4 ACL.ip access-list
Enables MAC packet classification on a Layer 2
interface.
mac packet-classify
Displays all ACLs.show access-lists
Shows either a specific IPv4 ACL or all IPv4 ACLs.show ip access-lists
Shows the running configuration of all interfaces or
of a specific interface.
show running-config interface
Enables collection of statistics for each entry in an
ACL.
statistics per-entry
Cisco Nexus 7000 Series Security Command Reference
421
I Commands
ip port access-group
To Next Page
Loading...
