Cisco Nexus 7000 Series - Page 131

Examples
This example shows how to apply the default CoPP best practice policy on the Cisco NX-OS device:
switch# configure terminal
switch(config)# copp profile moderate
switch(config)#
This example shows how remove the default CoPP best practice policy from the Cisco NX-OS device:
switch(config)# no copp profile moderate
switch(config)#
Related Commands
DescriptionCommand
Creates a copy of the CoPP best practice policy.copp copy profile
Displays the details of the CoPP best practice policy.show copp profile
Displays the CoPP status, including the last
configuration operation and its status.
show copp status
Displays the CoPP configuration in the running
configuration.
show running-config copp
Cisco Nexus 7000 Series Security Command Reference
105
C Commands
copp profile