Examples
This example shows how to enable monitoring permissions for all source groups to all destination groups:
switch# configure terminal
switch(config)# cts role-based monitor all
This example shows how to disable monitoring permissions for all source groups to all destination groups:
switch# configure terminal
switch(config)# no cts role-based monitor all
Related Commands
DescriptionCommand
Enables the Cisco TrustSec feature.feature cts
Displays the Cisco TrustSec SGACL policy
enforcement configuration.
show cts role-based enable
Cisco Nexus 7000 Series Security Command Reference
168
C Commands
cts role-based monitor