Examples
This example shows how to enter MAC access list configuration mode for a MAC ACL named mac-acl-01:
switch# configure terminal
switch(config)# mac access-list mac-acl-01
switch(config-acl)#
Related Commands
DescriptionCommand
Configures a deny rule in a MAC ACL.deny (MAC)
Applies a MAC ACL to an interface.mac port access-group
Configures a permit rule in a MAC ACL.permit (MAC)
Displays all MAC ACLs or a specific MAC ACL.show mac access-lists
Enables collection of statistics for each entry in an
ACL.
statistics per-entry
Cisco Nexus 7000 Series Security Command Reference
495
M Commands
mac access-list