Command History
ModificationRelease
Support for LDAP server groups was added.5.0(2)
The fallback error local keyword was added.5.0(2)
This command was introduced.4.0(1)
Usage Guidelines
The group radius, group tacacs+, group ldap, and group group-list methods refer to a set of previously
defined RADIUS, TACACS+, or LDAP servers. Use the radius-server host, tacacs-server host, or
ldap-server host command to configure the host servers. Use the aaa group server command to create a
named group of servers.
Use the show aaa groups command to display the server groups on the device.
If you specify more that one server group, the Cisco NX-OS software checks each group in the order that you
specify in the list.
If you specify the group method or local method and they fail, the authentication can fail. If you specify the
none method alone or after the group method, the authentication always succeeds.
The command operates only in the default VDC (VDC 1).
This command does not require a license.
Examples
This example shows how to configure the AAA authentication console login methods:
switch# configure terminal
switch(config)# aaa authentication login console group radius
This example shows how to revert to the default AAA authentication console login method:
switch# configure terminal
switch(config)# no aaa authentication login console group radius
Related Commands
DescriptionCommand
Configures AAA server groups.aaa group server
Configures LDAP servers.ldap-server host
Configures RADIUS servers.radius-server host
Displays AAA authentication information.show aaa authentication
Displays the AAA server groups.show aaa groups
Configures TACACS+ servers.tacacs-server host
Cisco Nexus 7000 Series Security Command Reference
28
A Commands
aaa authentication login console
To Next Page
Loading...
