Syntax Description
(Optional) Sequence number of the permit command,
which causes the device to insert the command in that
numbered position in the access list. Sequence
numbers maintain the order of rules within an ACL.
A sequence number can be any integer between 1 and
4294967295.
By default, the first rule in an ACL has a sequence
number of 10.
If you do not specify a sequence number, the device
adds the rule to the end of the ACL and assigns a
sequence number that is 10 greater than the sequence
number of the preceding rule.
Use the resequence command to reassign sequence
numbers to rules.
sequence-number
Cisco Nexus 7000 Series Security Command Reference
557
P Commands
permit (IPv6)
To Next Page
Loading...
