Cisco Nexus 7000 Series - Page 606

switch(config-role)# vlan policy deny
switch(config-role-vlan)# permit vlan 1, 10, 12, 20
This example shows how to deny a VLAN from a user role VLAN policy:
switch# configure terminal
switch(config)# role name MyRole
switch(config-role)# vlan policy deny
switch(config-role-vlan)# no permit vlan 2
Related Commands
DescriptionCommand
Enters VLAN policy configuration mode for a user
role.
vlan policy deny
Creates or specifies a user role and enters user role
configuration mode.
role name
Displays user role information.show role
Cisco Nexus 7000 Series Security Command Reference
580
P Commands
permit vlan