Specifies Layer-3 failed time-to-live redirected
packets. The default rate is 500 packets per second.
ttl
Specifies packets redirected to the supervisor module.
The default rate is 30000 packets per second.
receive
Number of packets per second. The range is from 1
to 33554431.
packets
Command Default
See Syntax Description for the default rate limits.
Command Modes
Global configuration
Command History
ModificationRelease
This command was deprecated and replaced with the rate-limiter
command.
4.1(2)
Added the port-security keyword.4.0(3)
This command was introduced.4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to configure a rate limit for control packets:
switch# configure terminal
switch(config)# platform rate-limit layer-3 control 20000
This example shows how to revert to the default rate limit for control packets:
switch# configure terminal
switch(config)# no platform rate-limit layer-3 control
Related Commands
DescriptionCommand
Displays the running configuration.show running-config
Cisco Nexus 7000 Series Security Command Reference
586
P Commands
platform rate-limit
To Next Page
Loading...
