Cisco Nexus 7000 Series - Page 644

Usage Guidelines
This command does not require a license.
The remark argument can be up to 100 characters. If you enter more than 100 characters for the remark
argument, the device accepts the first 100 characters and drops any additional characters.
Examples
This example shows how to create a remark in an IPv4 ACL and display the results:
switch# configure terminal
switch(config)# ip access-list acl-ipv4-01
switch(config-acl)# 100 remark this ACL denies the marketing department access to the lab
switch(config-acl)# show access-list acl-ipv4-01
IP access list acl-ipv4-01
100 remark this ACL denies the marketing department access to the lab
ciscobox(config-acl)#
Related Commands
DescriptionCommand
Configures an IPv4 ACL.ip access-list
Configures an IPv6 ACLipv6 access-list
Configures a MAC ACL.mac access-list
Displays all ACLs or one ACL.show access-list
Enables collection of statistics for each entry in an
ACL.
statistics per-entry
Cisco Nexus 7000 Series Security Command Reference
618
R Commands
remark