Cisco Nexus 7000 Series - Page 683

Specifies class selector 4 (precedence 4) DSCP
(100000).
cs4
Specifies class selector 5 (precedence 5) DSCP
(101000).
cs5
Specifies class selector 6 (precedence 6) DSCP
(110000).
cs6
Specifies class selector 7 (precedence 7) DSCP
(111000).
cs7
Specifies expedited forwarding DSCP (101110).ef
Specifies default DSCP (000000).default
Command Default
default
Command Modes
Policy map class configuration
Command History
ModificationRelease
This command was introduced.4.0(1)
Usage Guidelines
You can use this command only in the default virtual device context (VDC).
This command does not require a license.
Examples
This example shows how to configure the DSCP value for a control plane policy map:
switch# configure terminal
switch(config)# policy-map type control-plane PolicyMapA
switch(config-pmap)# class ClassMapA
switch(config-pmap-c)# set dscp 4
This example shows how to revert to the default DSCP value for a control plane policy map:
switch# configure terminal
switch(config)# policy-map type control-plane PolicyMapA
switch(config-pmap)# class ClassMapA
switch(config-pmap-c)# no set dscp 4
Cisco Nexus 7000 Series Security Command Reference
657
S Commands
set dscp (policy map class)