Cisco Nexus 7000 Series - Page 690

Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '10.10.1.1' (RSA) to the list of known hosts.
User Access Verification
Password:
This example shows how to create an SSH session to a remote device from the boot mode of the Cisco NX-OS
device:
switch(boot)# ssh user1@10.10.1.1
Related Commands
DescriptionCommand
Clears SSH sessions.clear ssh session
Copies a file from the Cisco NX-OS device to a
remote device using the Secure Copy Protocol (SCP).
copy scp:
Enables the SSH server.feature ssh
Starts an SSH session using IPv6 addressing.ssh6
Cisco Nexus 7000 Series Security Command Reference
664
S Commands
ssh