Cisco Nexus 7000 Series - Page 700

Use one of the follow methods to turn off suppression for the specified traffic type:
•
Set the level to 100 percent for the specified traffic type.
•
Use the no form of this command.
This command does not require a license.
Examples
This example shows how to enable suppression of broadcast traffic and set the suppression threshold level:
switch# configure terminal
switch(config)# interface ethernet 1/1
switch(config-if)# storm-control broadcast level 30
This example shows how to disable the suppression mode for multicast traffic:
switch# configure terminal
switch(config)# interface ethernet 1/1
switch(config-if)# no storm-control multicast level
Related Commands
DescriptionCommand
Displays the storm-control suppression counters for
an interface.
show interface
Displays the configuration of the interface.show running-config
Cisco Nexus 7000 Series Security Command Reference
674
S Commands
storm-control level