DescriptionCommand
Enables port security on a Layer 2 interface.switchport port-security
Configures the aging time for dynamically learned,
secure MAC addresses.
switchport port-security aging time
Configures the aging type for dynamically learned,
secure MAC addresses.
switchport port-security aging type
Configures a static MAC address.switchport port-security mac-address
Configures an interface or a VLAN maximum for
secured MAC addresses on an interface.
switchport port-security maximum
Configures the security violation action for an
interface.
switchport port-security violation
   Cisco Nexus 7000 Series Security Command Reference
682
S Commands
switchport port-security mac-address sticky