Cisco Nexus 7000 Series - Page 822

Ethernet1/3 10.1.1.1 red
Ethernet1/4 10.1.1.1 red
Ethernet1/5 10.1.1.1 red
Ethernet1/6 10.1.1.1 red
Ethernet1/7 10.1.1.1 red
Ethernet1/8 10.1.1.1 red
switch#
This example shows how to display the DHCP relay addresses configured Ethernet interfaces 1/2 through 1/4
and Ethernet 1/8:
switch(config-if)# show ip dhcp relay address interface ethernet 1/2-4,ethernet 1/8
Interface Relay Address VRF Name
------------- ------------- --------
Ethernet1/2 10.1.1.1
Ethernet1/3 10.1.1.1 red
Ethernet1/4 10.1.1.1 red
Ethernet1/8 10.1.1.1 red
Related Commands
DescriptionCommand
Enables the DHCP snooping feature on the device.feature dhcp
Enables the DHCP relay agent.ip dhcp relay
Shows DHCP relay status and server addresses
configured on the device.
show ip dhcp relay
Cisco Nexus 7000 Series Security Command Reference
796
Show Commands
show ip dhcp relay address