Cisco Nexus 7000 Series - Page 977

Test parameters that are configured for individual servers take precedence over global test parameters.
When the idle time interval is 0 minutes, periodic TACACS+ server monitoring is not performed.
This command does not require a license.
Examples
This example shows how to configure the parameters for global TACACS+ server monitoring:
switch# configure terminal
switch(config)# tacacs-server test username user1 password Ur2Gd2BH idle-time 3
Related Commands
DescriptionCommand
Displays TACACS+ server information.show tacacs-server
Cisco Nexus 7000 Series Security Command Reference
951
T Commands
tacacs-server test