To specify privilege levels, you must enable the cumulative privilege of roles for command authorization on
TACACS+ servers using the feature privilege command. There is no default privilege level.
This command does not require a license.
Command Modes
Global configuration
Command History
ModificationRelease
Added the ssh-cert-dn keyword option.8.0(1)
Removed support for RSA keys less than 1024 bits.5.1(1)
Added the keypair keyword option.5.0(2)
Added the priv-lvl keyword option.5.0(2)
Added the sshkey keyword option.4.1(2)
This command was introduced.4.0(1)
Usage Guidelines
The Cisco NX-OS software creates two default user accounts in the VDC: admin and adminbackup. The
nondefault VDCs have one default user account: admin. You cannot remove a default user account.
User accounts are local to the VDCs. You can create user accounts with the same user identifiers in different
VDCs.
The Cisco NX-OS software does not support all numeric usernames, whether created with TACACS+ or
RADIUS, or created locally. Local users with all numeric names cannot be created. If an all numeric user
name exists on an AAA server and is entered during login, the user is not logged in.
Caution
The Cisco NX-OS software accepts only strong passwords when you have password-strength checking enabled
using the password strength-check command. The characteristics of a strong password include the following:
•
At least eight characters long
• Does not contain many consecutive characters (such as “abcd”)
• Does not contain many repeating characters (such as “aaabbb”)
•
Does not contain dictionary words
•
Does not contain proper names
•
Contains both uppercase and lowercase characters
•
Contains numbers
Cisco Nexus 7000 Series Security Command Reference
972
U Commands
username
To Next Page
Loading...
