Epson C11CA88001A1 Service Manual

Epson Stylus Pro 4900/Epson Stylus Pro 4910 Revision A
DISASSEMBLY & ASSEMBLY Disassembly Flowchart 122
Confidential
INK SYSTEM MECHANISM
See “3.4.2.8 Front Cover (p142)”
See “3.4.2.3 Control Panel Cover
(p136)”
See “3.4.2.6 Right Cover (p139)”
See “3.4.2.15 CR Cover (p149)”
Start
See “3.4.4.6 APG Motor Assy
(p179)”
( 左のみ )
See “3.4.2.4 Left Cover (p137)”
See “3.4.4.4 Ink Mark Sensor
(p173)”
See “3.4.9.1 Ink Selector Assy
(p229)”
See “3.4.9.2 Printhead (p232)”
See “3.4.4.5 CR Unit/CR Belt
(p175)”
See “3.4.2.14 Media Eject Cover
(p148)”
See “3.4.9.13 Left Holder FFC
(p253)”
See “3.4.9.8 Full (Left) Side
Cartridge Holder (p242)”
See “3.4.3.3 Power Supply Box
(p157)”
See “3.4.2.5 Right Upper Cover
(p138)”
See “3.4.1.1 Unlocking the CR
Unit (p124)”
See “3.4.2.7 Left IC Cover Frame/
Right IC Cover Frame/ Left IC
Sensor/Right IC Sensor (p140)” (R
only)
See “3.4.1.5 Maintenance box 1
(p128)”
See “3.4.9.7 Home (Right) Side
Cartridge Holder (p239)”
See “3.4.9.6 Head Cap (p238)”
See “3.4.9.3 IS Unit (p233)”
See “3.4.1.1 Unlocking the CR
Unit (p124)”
See “3.4.9.5 Wiper Cleaner
(p237)”
See “3.4.9.4 Wiper (p236)”
See “3.4.2.10 Rear Cover (p144)”
See “3.4.9.9 Maintenance box 1
Holder (p245)”
See “3.4.2.10 Rear Cover (p144)”
See “3.4.2.10 Rear Cover (p144)”
See “3.4.9.14 Decompression
Pump (p254)”
See “3.4.9.12 Right Holder FFC
(p252)”
See “3.4.2.7 Left IC Cover Frame/
Right IC Cover Frame/ Left IC
Sensor/Right IC Sensor (p140)” (R
only)
See “3.4.2.10 Rear Cover (p144)”
See “3.4.9.11 Head FFC (p249)”
See “3.4.9.10 Ink Tubes (p247)”

Epson C11CA88001A1 Specifications

General

Brand	Epson
Model	C11CA88001A1
Category	Printer
Language	English