Epson Stylus Pro 4900/Epson Stylus Pro 4910 Revision A
MAINTENANCE Transportation 413
Confidential
5.3 Transportation
PREPARATION FOR TRANSPORTATION
1. Turn off the printer, and confirm that the printer is off. Then remove all the cables.
2. Remove the paper.
3. Remove the Auto Color Measurement Device.
MOVING/TRANSPORTING THE PRINTER
When you transport the printer, be sure to repack the printer using the original box and
packing materials.
SETTING UP THE PRINTER AFTER TRANSPORTATION
1. Make sure that the installation site is proper.
2. Connect the power cord, and turn the printer on.
3. Perform a nozzle check.
C A U T I O N
Make sure to keep the ink cartridge installed so as to prevent
ink from leaking or the printhead from drying.
Do not touch any parts other than those must be repaired to
avoid any damage to the printer.
C A U T I O N
When moving or transporting the printer, keep it flat. Do not tilt it
or turn it upside down to prevent ink from leaking.
To Next Page
Loading...
Need help?
General