Epson Stylus Pro 4900/Epson Stylus Pro 4910 Revision A
MAINTENANCE Cleaning 417
Confidential
CLEANING THE PLATEN’S SUCKING HOLES
If the paper feeding is unstable (if some floating or skewing of the paper can be seen),
check the sucking holes on the platen for paper dust clogging there. If there are some
clogging, clean the holes as follows.
1. Turn off the printer.
2. Open the printer cover. Push in the accumulated foreign material such as paper
dust into the holes using something like a toothpick.
Figure 5-6. Cleaning the sucking holes
To Next Page
Loading...
Need help?
General