Epson Stylus Pro 4900/Epson Stylus Pro 4910 Revision A
ADJUSTMENT Head Related Checks and Adjustments 341
Confidential
4.11.5 Auto Bi-D Adjustment
PAPER USED
Size: 16 inches
Type: Premium Glossy Photo Paper (250)
EXECUTION MODE
Normal Mode
PROCEDURE
1. Turn the printer ON.
2. Start the Service Program and select Auto Bi-D Adjustment.
3. Click [Run].
The adjustment pattern will be printed.
4. After the pattern was printed, the printer will automatically scan the pattern and
correct it (no need to adjust it manually).
5. The result will be displayed on the screen.
OK! is displayed: Normally adjusted. Go to Step 6.
NG!! is displayed: Error occurs.
Refer to Chapter 2 “Troubleshooting” (P. 46).
6. Turn the printer OFF to complete the adjustment.
Figure 4-49. Adjustment Pattern
To Next Page
Loading...
Need help?
General