Epson Stylus Pro 4900/Epson Stylus Pro 4910 Revision A
ADJUSTMENT Counter Reset 313
Confidential
SpectroProofer
CR Motor SpectroProofer CR Motor Counter
Paper Pressing Motor
SpectroProofer Paper Pressing Motor
Counter
C H E C K
P O I N T
The history of the Counter Clear can be checked per counter on the
NVRAM Viewer (P. 302).
C A U T I O N
Make sure to perform a Clear Counter for the SpectroProofer
after confirming that the SpectroProofer is in the ready state
(when the LED is on). If it is performed in the OFF or sleep
state, the counter is not reset correctly.
Make sure that the counter clear history stored in the NVRAM
is deleted by clicking [Run] of Counter Clear many times.
Table 4-6. Flag Setting List
Replaced Part/Unit Flag Setting Menu Name
Printer Main Board (when NVRAM Backup is NG) Initial Ink Charge Flag
Table 4-5. Clear Counter Menu List
Replaced Part/Unit Clear Menu Name
To Next Page
Loading...
Need help?
General