Epson Stylus Pro 4900/Epson Stylus Pro 4910 Revision A
PRODUCT DESCRIPTION Printing Specifications 16
Confidential
1.3 Printing Specifications
1.3.1 Paper Feed Specifications
1.3.2 Paper Specification
1.3.2.1 Supported Paper
The following explains the supported paper sizes and thickness.
ROLL PAPER
Note "*": Spacer for the borderless printing and 2-inch core are required.
Item Specification
Paper feed method Friction feed
Return pitch 2.2049 μm (1/11,520 inch)
Paper feeder
Roll paper manual feed
Cut sheet manual feed
Cut sheet front manual feed
Cassette paper feed
C A U T I O N
Do not use wrinkled, scuffed, torn, or soiled paper.
Load paper just before printing. Do not leave paper loaded on
the printer when not printing. Store paper properly following
the instruction that comes with the paper.
When large quantities of paper need to be prepared in advance,
make a test print using the paper before purchase.
Item Specification
Paper type Plain paper, recycled paper
Paper size
(within roll paper size)
2-inch core: 203 to 432 mm x to 45 m
3-inch core: 203 to 432 mm x to 30.5 m
Roll paper size
2-inch core: Outer diameter 103 mm or less x 1 roll
3-inch core: Outer diameter 150 mm or less x 1 roll
Paper thickness 0.08 to 0.11mm
Weight 64 to 90g/m
2
Available width for
borderless printing
A4/210 mm, A3/297 mm, Super A3/B/329 mm,
SuperW A3/329 mm, A2/420 mm*, 11 inch*, 17 inch, 8 inch*,
10 inch, 16 inch, 30 cm
To Next Page
Loading...
Need help?
General