Epson Stylus Pro 4900/Epson Stylus Pro 4910 Revision A
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 178
Confidential
A D J U S T M E N T
R E Q U I R E D
Be sure to refer to Chapter 4 “Adjustment” (see p277) and perform
specified adjustments after replacing or removing the CR Unit/CR
Belt.
<Adjustment items>
1. FFC Position Check
2. CR Belt Adjustment
3. PG Height Check & Adjustment
4. Nozzle Check
5. CR & PF Direction Head Slant Adjustment
6. CR Encoder and Scale Check
7. CR Speed Initialize
*
8. Active Damper Adjustment
9. Ink Mark Sensor Check & Adjustment
10. PW + T&B&S Check & Adjustment
11. Auto Bi-D Adjustment
*: Not necessary for CR Belt replacement
Lubrication
When replacing or maintaining the CR Unit/CR Belt, carry out the
specified lubrication if necessary. (See Chapter 6
“MAINTENANCE”
(p431)
).
To Next Page
Loading...
Need help?
General