Epson Stylus Pro 4900/Epson Stylus Pro 4910 Revision A
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 205
Confidential
5. Disengage the hook, and remove the gear.
6. Remove the Pickup Roller.
Figure 3-126. Removing the Pickup Roller
A D J U S T M E N T
R E Q U I R E D
Be sure to refer to Chapter 4 “Adjustment” (see p277) and perform
specified adjustment after replacing the Pickup Roller.
<Adjustment item>
Counter Reset (Pickup Roller Counter)
Pickup Roller
Gear
Hook
To Next Page
Loading...
Need help?
General