Epson Stylus Pro 4900/Epson Stylus Pro 4910 Revision A
ADJUSTMENT CR Related Check & Adjustments 325
Confidential
22. Check if the CR Unit stops at 1.75.
Stop at 1.75: Go to Step 23
Not stop at 1.75: Return to Step 7
23. Remove the thickness gauge.
24. Install the CR Cover.
25. Close the Printer Cover.
26. Press the [F12] key to cap the Printhead.
27. Turn the printer OFF to complete the adjustment.
To Next Page
Loading...
Need help?
General