Epson Stylus Pro 4900/Epson Stylus Pro 4910 Revision A
ADJUSTMENT Head Related Checks and Adjustments 343
Confidential
4.11.6.2 Adjusting Method
REQUIRED TOOLS
ADJUSTMENT WORKFLOW
The workflow of the adjustment is explained in this section.
Figure 4-50. Adjustment Workflow
Table 4-7. Tools Required
Tool Application/Specification
Plain Paper (A4) For nozzle check
EPSON Enhanced (Archival) Matte
Paper (A4)
For printing charts
Computer Following drivers should be installed beforehand.
Printer driver for this product
USB driver for the calibrator
GretagMacbeth eye-one (i1)
(Calibrator)
With UV filter
Calibration plate (White plate) Accessory provided with the calibrator
Scanning ruler (Scale) Accessory provided with the calibrator
USB cable To connect the computer and the calibrator
Black sheet Should be larger than A4
Clear file Required when sending charts
Cleaning
Nozzle check
Alignment check
Print calibration chart
Measure color
Write the color ID
Print validation chart
Measure color
Output the result
START
END
To Next Page
Loading...
Need help?
General