Epson Stylus Pro 4900/Epson Stylus Pro 4910 Revision A
ADJUSTMENT SpectroProofer Related Adjustments 402
Confidential
12. Confirm that [ON] is displayed on the confirmation screen and click [OK].
[ON] is displayed: Go to Step 14
[ON] is NOT displayed: Go to Step 13
13. Check the wiring of the Backing Sensor. If there is no abnormality on the wiring,
replace the Backing Sensor (P. 272).
Return to Step 7 to check again.
14. Click [Finish].
15. Turn the printer OFF and finish the adjustment.
Figure 4-110. [ON] Confirmation Screen
TBD
To Next Page
Loading...
Need help?
General