Hioki 8841 - Setting the Waveform Parameter GO;NG Stop Mode

358
────────────────────────────────────────────────────
16.1 Waveform Parameter Calculation (MEM)
────────────────────────────────────────────────────
16.1.3 Setting the Waveform Parameter GO/NG Stop Mode
s1433
Flashing cursor
Function
display Meaning
#g-wv4, 5, 6
:
Stop recording on GO result.
:
Stop recording on NG result.
:
Stop recording on GO or NG result.
Specify which evaluation option, GO or NG, should be used to stop the
recording.
Procedure
Screen: STATUS3
1. Move the flashing cursor to the position "stop mode".
2. Make the setting with the function keys.