23
────────────────────────────────────────────────────
2.8 Loading Recoding Paper
────────────────────────────────────────────────────
Stock cover
Head up/down
lever
Holder
Printer roller
Back side of
paper
ttachment
2.8 Loading Recoding Paper
1. Press the stock cover and open it.
2. Put down the head up/down lever.
3. Insert the attachments into the ends of the roll
of recording paper and set the paper into its
holder.
4. Insert the leading edge of the recording paper
from above into the gap behind the printer
roller, and pull it out to the other side.
To Next Page
Loading...
