93
────────────────────────────────────────────────────
6.3 ST ATUS Settings (RMS)
────────────────────────────────────────────────────
6.3.8 Setting the Printer Function (Real Time Printing)
Function
display Meaning
##F6
:
Printing is disabled.
:
Printing is enabled.
6.3.9 Setting the Auto Save Function
Function
display
Meaning
:
Auto save is disabled.
:
Automatically stored on floppy disk
:
Automatically stored on PC card.
:
Automatically stored on connected SCSI device.
:
Automatically stored on MO disk.
:
(When using a LAN card)
A LAN is used to transfer data to the 9333 LAN COMMUNICATOR.
Function
display
Meaning
:
When the media becomes full, automatic storage stops.
:
When the media becomes full, old files are deleted to make room for
automatic storage.
With the binary format selected, the file with the extension 'RMS' is
deleted. With the text format selected, files with the extension 'TXT'
are deleted.
The input waveform is continuously printed in real time.
Procedure
Screen: STATUS
1. Press the
STATUS
key to display the STATUS screen.
2. Move the flashing cursor to the printer item.
3. Use the function keys to make a setting.
・
When the function is enabled, measurement data are automatically stored on
a floppy disk, PC card, MO disk or connected SCSI device after they are
captured.
・
The Auto Save function stores a file in the directory currently selected on the
file screen. See Section 14.12.2.
Procedure
Screen: STATUS
1. Press the STATUS key to display the STATUS screen.
2. Move the flashing cursor to the auto save item.
3. Use the function keys, select the media for auto saving.
4. When Media is selected, the Storage method item appears.
To Next Page
Loading...
