Hioki 8841 - Setting the Output Destination by the PRINT Key

294
────────────────────────────────────────────────────
13.4 Setting the SYSTEM Screen (printout)
────────────────────────────────────────────────────
13.4.5 Setting the Output Destination by the PRINT Key
Function
display
Meaning
:
Output to the internal printer.
:
Output to the external printer.
Function
display
Meaning
##g-esc
:
Use the ESC/P as a control code.
:
Use the ESC/P raster as a control code.
Function
display
Meaning
##g-cl1, cl2, cl3, cl4
:
Output data in color.
:
Output data in monochrome.
Function
display
Meaning
##
:
Data is printed in the 0.8 size
:
Data is printed in the 1 size
To output data with the 8841/8842 printer, set destination to "Internal
Printer". To use the external printer to output, see Section 13.7, "External
printer."
Procedure
Screen: INTERFACE (SYSTEM4)
1. Press the SYSTEM key or function key to display the
INTERFACE screen.
2. Move the flashing cursor to the position shown in the
figure on the left.
3. Use the function key to make a setting.
・ Selecting the output destination
・ Selecting the control code.
(When the output destination is set to external printer)
・ Selecting the color of the output destination
(When the output destination is set to external
printer）
・ Selecting the print size
(When the output destination is set to external
printer）