386
────────────────────────────────────────────────────
18.1 General Specifications
────────────────────────────────────────────────────
Dielectric strength
One minute at 1.35 kVAC between the main unit and the power supply
One minute at 3.7 kVAC between the input units and the main unit,
and between the input units
(For input units, same as specifications of each input unit.)
Power supply
Rated power voltage 100 to 240 VAC, 10 to 28VDC (using the 9433)
(Voltage fluctuations of
10% from the rated supply voltage are taken
into account.)
Rated power frequency 50/60 Hz
Maximum rated power
8841: 300 VA max
（
when printer off and 8936 installed: 85 VA
）
（
when printer off and 8946 installed: 95 VA
）
8842: 300 VA max
（
when printer off and 8936 installed: 105 VA
）
Dimensions and mass
8841: Approx.280W
×
300H
×
140D mm (11.02"W
×
11.81"H
×
5.51"D)
(excluding projections) Approx. 6 kg (211.64 oz)
MO: Approx.280W
×
300H
×
167D mm (11.02"W
×
11.81"H
×
6.58"D)
(excluding projections) Approx. 6.6 kg (232.80 oz)
8842: Approx.280W
×
300H
×
220D mm (11.02"W
×
11.81"H
×
8.66"D)
(excluding projections) Approx. 7.5 kg (264.55 oz)
MO: Approx.280W
×
300H
×
247D mm (11.02"W
×
11.81"H
×
9.73"D)
(excluding projections) Approx. 8.1 kg (285.71 oz)
Standards
Applying
EMC EN61326, Class A
EN 61000-3-2
EN 61000-3-3
Safety EN61010
Pollution Degree 2, measurement category
Ⅱ
(anticipated transient overvoltage 4000 V)
Method of recording
Thermosensitive recording method using a thermal line head
Recording paper
Roll type thermosensitive paper, 216 mm
×
30 m (8.51"
×
98.43")(long)
Width of recording
Total recording width: 212 mm
±
1 mm (8.35"
±
0.04")
Waveform portion: 200 mm (20 DIV)
±
1 mm (7.87" (20DIV)
±
0.04"))
Recording speed
Approx. 25 mm (0.99")/s max.
Paper feed accuracy
±
1% (25
o
C (77
｡
F), 60%RH)
Display language
Japanese/English (selectable)
Screen
10.4 inch TFT color LCD display (480
×
640 dots)
Display resolution
In the memory recorder, recorder, RMS recorder, and REC&MEM functions,
(1 DIV = 25 (horizontally)
×
32 (vertically) dots)
Waveform: 15 DIV
×
20 DIV
Text: 30 characters
×
40 lines
In the FFT function
(1 DIV = 40 (horizontally)
×
20 (vertically) dots)
Waveform: 10 DIV
×
20 DIV
Text: 30 characters
×
40 lines
In the X-Y display
(1 DIV = 32 (horizontally)
×
32 (vertically) dots)
Waveform: 10 DIV
×
10 DIV
Text: 30 characters
×
40 lines
Dots spacing
0.33 H
×
0.33 Vmm (0.013" H
×
0.013" V)
Backlight lifetime
Approx. 50,000 hours (reference value)
NOTE
Recorder
Display
TFT color LCDs characteristically have a few defective pixels that do not
always light, or that remain lit. We do not consider the presence of six or
fewer such defects to indicate a damaged or faulty display. Please be aware
of this in advance.
To Next Page
Loading...
