415
────────────────────────────────────────────────────
20.1 Main tenance and Inspection
────────────────────────────────────────────────────
16
17
18
19
20
6
7
8
9
10
11
12
13
14
A
Chapter 20
Maintenance and Service
20.1 Maintenance and Inspection
To ensure the safe operation of this unit, perform maintenance
regularly.
･
If the unit has been subject to moisture, or if oil and dust have accumulated
in the unit interior, the danger of electrical shock or fires resulting from the
deterioration of insulation increases greatly. If the unit is ever subject to
excessive moisture, oil, or dust, cease use immediately, and return the unit to
us for maintenance.
･
Periodic calibration is necessary to verify and maintain accuracy. If
calibration becomes necessary, return the unit to us for maintenance.
･
This product uses a lithium battery to back up it's memory. As the battery
power is consumed, it's ability to store measurement conditions diminishes.
In the event that measurement conditions can no longer be stored, please
contact the manufacturer for repair service.
･
Spare and replacement parts for this product are guaranteed to be available
only until 7 years after manufacture of this model is terminated.
･
If the unit is not functioning properly, check the batteries, the probe and
leads wiring, fuse blowing, and the "Troubleshooting" list. If a problem is
found, contact your dealer.
･
Do not transport using the 9397-01 or 9349 CARRYING CASEs.
Cleaning the Unit
･ Gently wipe dirt from the surface of the unit with a soft cloth moistened with
a small amount of water or mild detergent. Do not try to clean the unit
using cleaners containing organic solvents such as benzine, alcohol, acetone,
ether, ketones, thinners, or gasoline. They may cause discoloration or
damage.
･ Wipe the LCD display gently with a dry, soft cloth.
To Next Page
Loading...
