12: SCPI command reference 2470 High Voltage SourceMeter Instrument
12-98 2470-901-01 Rev. A / May 2019
Example
:STAT:OPER:ENAB #b0101000000000000
Sets the 12 and 14 bits of the operation
status enable register using a decimal value.
You could also send the decimal value:
:STAT:OPER:ENAB 20480
Or the hexadecimal value:
Also see
Operation Event Register (on page B-7)
:STATus:OPERation[:EVENt]?
This command reads the Operation Event Register of the status model.
Type Affected by Where saved Default value
Usage
:STATus:OPERation[:EVENt]?
Details
This attribute reads the operation event register of the status model.
The instrument returns a decimal value that corresponds to the binary-weighted sum of all bits set in
the register.
Example
Returns the contents of the Operation Event Register of the
status model.
Also see
Operation Event Register (on page B-7)
To Next Page
Loading...
Need help?
General
