Tektronix Keithley SourceMeter 2470

Section
12: SCPI command reference 2470 High Voltage SourceMeter Instrument
Reference Manual
12-134 2470-901-01 Rev. A / May 2019
Example
TRACe:STAT:AVERage?
Returns the average reading for the readings in the default
buffer
defbuffer1
.
TRACe:STAT:AVERage? "testData"
Returns the average reading for the readings in the
user-defined buffer
testData
.
Also see
Reading buffers (on page 6-1)
Remote buffer operation (on page 6-25)
:TRACe:MAKE (on page 12-127)
:TRACe:STATistics:CLEar (on page 12-134)
:TRACe:STATistics:MAXimum? (on page 12-135)
:TRACe:STATistics:MINimum? (on page 12-135)
:TRACe:STATistics:PK2Pk? (on page 12-136)
:TRACe:STATistics:STDDev? (on page 12-137)
:TRACe:STATistics:CLEar
This command clears the statistical information associated with the specified buffer.
Type Affected by Where saved Default value
Command only
Not applicable
Not applicable
Not applicable
Usage
:TRACe:STATistics:CLEar
:TRACe:STATistics:CLEar "<bufferName>"
<bufferName>
The name of the reading buffer, which may be a default buffer (
defbuffer1
or
defbuffer2) or a user-defined buffer; if no buffer is defined, clears the statistics
from
defbuffer1
Details
This command clears the statistics without clearing the readings.
Example
TRACe:STATistics:CLEar
Clear all statistics in defbuffer1.
TRACe:STATistics:CLEar "testData"
Clears all statistics in a user-defined buffer
named
testData
.
Also see
Reading buffers (on page 6-1)
Remote buffer operation (on page 6-25)
:TRACe:MAKE (on page 12-127)
:TRACe:STATistics:AVERage? (on page 12-133)
:TRACe:STATistics:MAXimum? (on page 12-135)
:TRACe:STATistics:MINimum? (on page 12-135)
:TRACe:STATistics:PK2Pk? (on page 12-136)
:TRACe:STATistics:STDDev? (on page 12-137)